Using advanced sound options, Adjustment using test tone, Dolby digital playback – Optimus STAV-3790 User Manual

Page 27: Dvd 5.1-channel playback, Using the midnight mode, Program format indicators

Advertising
background image

27

Using Advanced Sound Options

Adjustment Using Test Tone

The test tone lets you balance the signal levels between all your speak-
ers.

To turn on the test tone, press

then press

TEST TONE

. The receiver

sounds a 2-second tone from the front left, center, front right, and sur-
round right, surround left, subwoofer, in sequence.

FL

,

CT

,

FR

,

SR

,

SL

,

and

SW

appear as the test tone sounds.

Note: The test tone sounds only for the speakers that you connected
and activated as described in “Initial Setup.”

Press

– CH LEVEL +

while the test tone sounds for the speaker you want to

adjust.

Press

TEST TONE

again to turn off this feature.

Dolby Digital Playback

When you want to play a source that has Dolby Digital audio signal, set
the source to digital mode (see “Switching Analog/Digital Signal Input”
on Page 23) and press

. Then activate the source device.

DOLBY

DIGITAL

appears on the display as the receiver receives the Dolby Dig-

ital signals.

Note: When you connect a DVD/LD player that uses AC-3 RF output,
you need to connect an optional RF demodulator.

DVD 5.1-Channel Playback

When you connect a multi-channel decoder or DVD player with 5.1-
channel output (see “DVD 5.1-Channel Inputs” on Page 11), press

DVD/

LD

on the front panel twice (once to select the DVD/LD function, once to

set the receiver to 5.1-channel mode).

DVD 5.1ch

appears on the dis-

play.

When you select this mode

DSP

mode,

SIGNAL

SELECT

,

ATT

,

DIRECT

,

TRE-

BLE

,

BASS

,

MIDNIGHT

are disabled.

Using the Midnight Mode

You can compensate for the effect of sound deterioration at low listening
levels to enjoy the surround sound of your favorite movie whenever you
desire.

Press

MIDNIGHT MODE

(

MIDNIGHT

on the remote control) so

MIDNIGHT

appears on the display. Press the button again to disable this feature.

Program Format Indicators

The following indicators light to show the channels being played.

In 5.1-channel Dolby Digital mode:

L

(left front),

C

(center),

R

(right

front),

LS

(left surround), and

RS

(right surround).

In Dolby Surround mode:

L

(left front),

R

(right front), and

S

(surround).

31-3046.fm Page 27 Monday, January 29, 2001 12:43 PM

Advertising