Optimus STAV-3790 - Manual (Page 7)

7
Preparing Your Receiver
Connecting the Front Speakers
Follow these steps to connect the right speaker to the receiver’s right
FRONT SPEAKERS terminals.
1. Press open the receiver’s FRONT SPEAKERS R (+) red lever and insert
the ridged or color-coded conductor’s end into the small hole.
Press the lever closed to secure the conductor.
2. Press open the receiver’s FRONT SPEAKERS R ( – ) black lever and insert
the other conductor’s end into the small hole. Press the lever
closed to secure the conductor.
3. Connect the ridged or color-coded conductor’s loose end to the
right speaker’s positive (+) terminal.
4. Connect the remaining loose conductor to the right speaker’s neg-
ative (–) terminal.
Repeat Steps 1–4 to connect the left speaker to the receiver’s FRONT
SPEAKERS left terminals.
Note: You can connect two sets of front speakers to A and B terminals,
but only A speaker terminals are active when you use the surround
sound system. If you connect only one set of front speakers, be sure to
connect them to the
A terminals.
CENTER
PREOUT
SUB
WOOFER
PREOUT
L R
L R
SURROUND
SPEAKERS
CENTER
SPEAKER
FRONT SPEAKERS
L R
L R
A
B
A
B
CAUTION: SPEAKER IMPEDANCE
6 OR 8 ~16 / SPEAKER
AUDIO
IN
AUDIO
IN
Front Speakers
Center Speaker
Right Left
Surround Speakers Amplified
Subwoofer
Note: Be sure you connect the re-
ceiver’s right and left positive (+) and
negative (–) terminals to the speaker’s
corresponding right and left positive (+)
and negative (–) terminals.
31-3046.fm Page 7 Monday, January 29, 2001 12:43 PM