Oricom W1 - Manual (Page 13)

13
2. If there is caller name in the CID record, the first 8 characters are
displayed for you to edit. If no caller name is available, you will be
prompted to enter a name.
3. Press OK to save the name. You will not be able to save it if this
name already exists in the phonebook. Edit the name and try again.
4. Edit the number if necessary and press OK to save it.
The record is now saved into the phonebook. The original CID record in
the call list will now show the new name that you have entered.
Deleting a CID record
While you are reviewing the CID record that you would like to delete,
1. Press
DEL .
2. Press OK to confirm.
Deleting the entire call log
While you are viewing any CID record,
1. Press and hold
DEL until you are prompted to confirm the action.
2. Press OK .
The call log is now empty.
LAST NUMBER DIALED
Viewing the last number dialled
Your phone stores the last external numbers dialled, up to 20 digits.
1. Press
during standby. The last number dialled, if any, is
displayed.
2. If a redial number matches a phonebook record, the phonebook
name will be displayed instead. Press OK to view the number.
3. turns on when the number consists of more than 12 digits. You
can press OK to view the off page digits.
Storing a previously dialled number into phonebook
While you are reviewing a previously dialled number that you would like
to save,
1. Press
.
2. Use the number keys to enter the name. If you make a mistake, use
DEL to do the editing. A name can contain up to 8 characters.
If there’s already a phonebook record matching the number, that
phonebook name will appear and you can edit it.