Oki FAX 740 - Manual (Page 19)

19
MEMORY Key
This key selects memory transmit operation. Documents
may be scanned into memory for immediate or later
transmission.
CLEAR Key
This key is used to delete entries for various machine
settings or stored numbers. It is also used during editing
numbers and settings to advance the editing position one
character at a time when changing settings or stored fax
numbers.
QUICK Key
This key is used to initiate quick dialling of stored fax
numbers. Pressing
[QUICK] followed by a two-digit number
or a one-touch quick dial key selects one of up to 60 stored
fax numbers.
REDIAL/PAUSE Key
This key redials the most recently dialled fax number. It is
also used to enter a brief pause in a stored fax number,
such as the pause sometimes required after the access digit
for an outside line via an internal telephone exchange.
HOOK VOICE REQUEST Key
This key is used to place the machine in an on-line state for
manual dialling, so that you may monitor the audible
progress of a call. It is also used to signal to the remote
party that you require voice communication after the
currently transmitting or receiving fax message.
POWER/ALARM Light
This light illuminates when power is applied and the
machine is switched on. In the event of a malfunction, or if
recording paper runs out, this lamp will flash on and off.