Oki FAX 740 - Manual (Page 54)

54
Closed Network
LIMIT RX? Y/N
1. Press [YES] to set closed network access.
To move on to the next parameter, press [NO] .
RX: ON-* OFF-#
2. Press [*] to turn closed network ON, or [#] to turn it
OFF, then press [YES] .
Note: ON requires that the remote transmitting OKIFAX
740 must have the same ID code set as your machine.
(Other types of remote fax machine may not support
this function.)
Error Correcting Mode (ECM)
ECM TRX? Y/N
1. Press [YES] to set ECM.
To return to standby, press [NO] .
ECM: ON-* OFF-#
2. Press [*] to turn ECM ON, or [#] to turn it OFF, then
press [YES] .
4. Press [YES] to confirm your choice and return to standby.
3. To return to standby, press [FUNCTION] .