Onkyo MB-S1 - Manual (Page 22)

21
Press the REC MODE button to select the
desired recording mode. The recording mode
switches to the next one with each press of the
button.
PCM: Records the signal on CD without compression. You will get
better sound quality than MP3 formats, but the size of music files is
larger, occupying more space on the HDD.
MP3 96Kbps: The size of music files will be 3/4 of those recorded
in 128Kbps, and you can store more files on the HDD.
MP3 128Kbps: The size of music files will be 1/10 of those recorded
in PCM mode.
MP3 192Kbps: The size of music files will be 1.5 times larger than
those recorded in 128Kbps. You can store fewer files on the HDD,
but will get better sound quality then 96Kbps and 128kbps.
Recording
Notice:
Available recording modes and speeds depend on the data or format
for recording source. For more information, see table on page 24.
OPERATION
C D HDD
HDD REC
PLAY PAUSE /
REC MODE
ON
STANDBY
USB
HARD DISK MUSIC LIBRARY MB-S 1
OPERATION
MULTI JOG
PLAY MODE
MENU/EXIT
PUSH TO ENTER
PLAY LIST
EDIT/CLEAR
NO YES
STANDBY/ON
STOP PLAY PAUSE /
DISPLAY CD DUBBING TEXT HDD REC REC MODE EXTERNAL INPUT FAVORITE IT
C D HDD
/
buttons
OPERATION
button
STOP button
PLAY PAUSE / button
(open/close) button
CD DUBBING button
HDD REC button
Recording an audio CD or CD-ROM synchronously
1. Set the CD on the CD tray.
For setting the CD, see page 19.
2. Activate the CD player.
Press the CD button.
4. Put the MB-S1 into the recording standby state.
Press the HDD REC button. The MB-S1 enters
the CD synchronous recording standby state.
The display area will change to
.
5. Select a target group for recording.
Press the HDD REC button again to select a
target group for recording. You can select
CURRENT or NEW for the target group.
CURRENT: The new recording will be added
to the end of the existing group containing
recorded tracks.
NEW: The new recording will be recorded as a
first track for a new group.
6. Start recording.
Press the PLAY PAUSE / button to
start recording.
After recording until the end of the CD, the
MB-S1 stops automatically.
Recording using the remote controller
3. Select a recording mode.
HDD REC
1. Activate the
CD player.
2. Select a
recording
mode.
Using the remote controller
Do the following steps in numeric order.
5. Start
recording
3. Put the MB-S1
into the
recording
standby state.
4. Select a target
group for
recording.