Onkyo CR-325 - Manual (Page 14)

14
Getting to Know the CD receiver
—Continued
Controlling an Onkyo MD recorder, cassette deck, or RI Dock
Explanation of buttons for using the Onkyo MD recorder, cassette deck, or RI Dock, when connected to the
MD/TAPE jack or DOCK IN jack of the CD receiver.
• See pages 21-23 for instructions on connecting the components.
• To control the MD recorder, the Input Display for the MD/TAPE jacks must be set to “MD” (see page 27).
Example: Shows the case of :
the [YES/MODE/SHUFFLE] button.
• When the cassette deck is connected to the MD/TAPE
jack of the CD receiver and the input source is set to
“TAPE”, it works as a DOLBY NR button.
• Refer to the instruction manual for each connected component for details. For column items with no notation: buttons
will not function when pressed.
6
7
8
9
bk
4
1
2
5
3
Jack MD/TAPE DOCK
TAPE MD DOCK
1 ~ 9 1 ~ 9
0 10/0
>10 >10
MENU/NO/CLEAR CLEAR MODE
ENTER ENTER SELECT
DOCK
DOCK
DOCK
MD/TAPE
MD/TAPE
MD/TAPE ( )
DISPLAY DISPLAY BACKLIGHT
REPEAT REV MODE REPEAT REPEAT
YES/MODE/SHUFFLE DOLBY NR MODE SHUFFLE *1
*1. In “Cursor Mode” it works as a MENU button.
/ / / /
*2
*2. In “Cursor Mode” it can be used for navigation menus.
/ / /
Button
Input source