Onkyo CR-325 - Manual (Page 20)

20
Connecting Other Components
• Before making any connections, read the manuals
supplied with your other components.
• Don’t connect the power cord until you’ve completed
and double-checked all connections.
Connection Color Coding
RCA-type audio connections are usually color-coded:
red and white. Use red plugs to connect right-channel
audio inputs and outputs (typically labeled “R”). Use
white plugs to connect left-channel audio inputs and out-
puts (typically labeled “L”).
• Push plugs in all the way to make
good connections (loose connec-
tions can cause noise or malfunc-
tions).
• To prevent interference, keep
audio cables away from power
cords and speaker cables.
Note:
Do not put anything on top of the CD receiver, as it may
interfere with proper ventilation.
The CD receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a
built-in amplifier).
About Connections
Left (white)
Analog audio
cable
Right (red) Right (red)
Left (white)
Right!
Wrong!
Connecting a Subwoofer
PRE OUT
SUB
WOOFER
: Signal flow
Powered subwoofer
CD receiver