Viewing a video tape – Optimus - Katadyn Products Inc. OPTIMUS MODEL 111 User Manual

Page 21

Advertising
background image

21

VIEWING A VIDEO TAPE

Loading a Video Tape

1. Turn on the TV and set it to the same chan-

nel as the VCR’s

3 CH. 4

switch.

Note: If you are using a TV/monitor that is
connected to the VCR’s

AUDIO/VIDEO OUT

jacks, set the TV/monitor to the video
mode.

2. Hold the cassette with the main label fac-

ing up and the spine facing out from the
VCR. Then insert the cassette into the
VCR’s compartment and gently push the
center of its spine until the VCR draws it in.

The VCR automatically turns on. If the erase-
protection tab has been removed from the cas-
sette, playback automatically begins (see
“Erase Protection” on Page 27).

Caution: Never insert anything except a VHS
video cassette into the cassette compartment.
Anything else might damage the VCR.

Playing a Video Tape

1. Load a video tape.

2. If playback does not automatically begin,

press

PLAY

. The VCR plays the tape.

Notes:

• The following screen appears when you

press

PLAY, FF, REW,

or

REC/TIME

with-

out inserting a cassette.

• During playback, the VCR automatically

adjusts tracking, but you can manually
adjust it if necessary (see “Manually
Adjusting Tracking” on Page 26).

3. (Model 61 only) Follow these steps to

choose the type of audio you want the
Model 61 to play back.

To select the audio output option:

a. Press

MENU

, hightlight

SET UP VCR

using

SEL s/t

, then press

SET

.

b. Highlight

SET

AUDIO

MODE

using

SEL

s/t

, then press

SET

.

c. Highlight

PLAY

AUDIO

using

SEL

s/t

,

then press

SET

until the desired option

HIFI

or

NORMAL

— appears.

d. Repeatedly press

MENU

to return to the

normal screen.

Note: If you play a tape recorded on a
standard VCR, the Model 61 plays the
standard audio track, regardless of the
audio output setting.

4. To stop playback before the end of the

tape, press

STOP

.

5. To eject the tape, press

STOP/EJECT

on

the VCR.

Notes:

• If the tape reaches the end before you

press

STOP

, the VCR automatically

stops the tape and completely rewinds it.
If the erase-protection tab has been
removed, the VCR then ejects the cas-
sette.

• When the VCR is off, you can press

STOP/EJECT

to eject a tape. The VCR

ejects the tape then turns itself off.

NO CASSETTE

PLEASE INSERT A CASSETTE

16-548.fm Page 21 Tuesday, July 20, 1999 4:54 PM

Advertising
This manual is related to the following products: