Optimus - Katadyn Products Inc. OPTIMUS MODEL 111 - Manual (Page 28)

28
SELECTING THE SIGNAL
TO RECORD
Follow these steps to select the signal to
record — from the
IN FROM ANT jack or an au-
dio/video source.
1. Press MENU . The TV displays the main
menu.
2. Press SEL s/t to highlight SET UP VCR ,
then press SET . The TV displays the SET
UP VCR menu.
3. Press SEL s/t to highlight INPUT
SELECT , then press SET so the TV dis-
plays the desired indicator: TUNER to
record from a source connected to the IN
FROM ANT terminal, LINE 1 or LINE 2 to
record from a source connected to the
AUDIO 1/VIDEO 1 IN or AV2 AUDIO/VIDEO IN
jacks.
Notes:
• To select LINE 1 or LINE 2 , you can also
press CH s/t to set the VCR to one channel
higher than the highest channel number (or
one channel lower than the lowest channel
number).
• Select LINE 1 for recording signals from
the back AUDIO 1/VIDEO 1 IN jacks, or
LINE 2 for recording signals from the front
AV2 AUDIO/VIDEO IN jacks.
RECEIVING/RECORDING
STEREO/SAP BROADCASTS
(MODEL 61 ONLY)
The Model 61 has three channels for audio re-
cording — two (left and right) stereo channels
on the Hi-Fi track, and one monaural channel
on the standard track.
Press DISPLAY to display the audio programs
available on the broadcast you are currently
tuned to. The TV displays
STEREO , SAP , and
MONO . Audio modes that are not available are
shown in parenthesis. The current audio mode
is indicated by an arrow.
When the broadcast contains a SAP (second-
ary audio program) signal, you can choose to
record the main stereo signal, the SAP signal,
or a mono signal by changing the setting in the
SET UP VCR menu.
1. Press MENU , highlight SET UP VCR using
SEL s/t, then press SET .
2. Highlight SET AUDIO MODE using SEL s/t,
then press SET .
3. Highlight AUDIO MODE using SEL s/t, then
press SET until the desired option — STE-
REO , SAP , or MONO — appears on the
screen.
4. Repeatedly press MENU to return to the
normal screen.
16-548.fm Page 28 Tuesday, July 20, 1999 4:54 PM