Optimus - Katadyn Products Inc. OPTIMUS MODEL 111 - Manual (Page 31)

31
If you have not yet entered any programs,
the TV displays the program entry menu
when you press
PROG .
8. Use SEL s/t to select the date when you
want to record.
To record a program at the same time on
the same day every week, press either but-
ton until the TV displays
WEEKLY and the
desired day of the week.
To record a program at the same time
Monday through Friday, press either button
until the TV displays
DAILY MON-FRI .
To record a program at a set time today,
press either button until the TV displays
TODAY and today’s date.
To record a program at a specific time and
date, press
SEL s/t to select the specific
date.
Press SET to enter your selection.
9. Use SEL s/t to select the start hour. When
the correct hour appears, press SET . Then
use SEL s/t to select the minute, and press
SET .
10. Repeat Step 9 to set the end time.
11. Use SEL s/t to select the channel.
To record from a source connected to the
AUDIO 1/VIDEO 1 IN or AV2 jacks, press
SEL s/t until the TV displays LINE 1 or
LINE 2 .
12. Use SEL s/t to select the tape speed ( SP ,
LP , or EP ).
13. Double-check all the set information.
• If the information is correct, press PROG .
• If an entry is not correct, press SET or
CLEAR to move the cursor to the wrong
entry, enter the correct information, then
press
PROG .
Note: The TV displays PROGRAM IS
INCOMPLETE if you did not correctly
enter a timer program before pressing
PROG . Check and correct the program,
then press PROG again.
The TV displays the timer program set-
tings. To enter more programs, use
SEL s/t
to select another program number and
repeat Steps 7–13.
14. Press PROG again. The TV briefly displays
TURN VCR OFF FOR TIMER RECORD-
ING .
15. Press POWER to turn off the VCR. The
VCR displays TIMER.
Notes:
• Be sure that the VCR displays TIMER
when you turn it off. If it does not appear,
check your programming.
• If you insert a cassette with its erase-
protection tab removed and set the VCR’s
timer, the VCR ejects the cassette and
flashes TIMER on the display.
• If you set up the VCR to record a cable
program through a cable box, be sure to
leave the cable box turned on and tuned to
the desired station before the timer pro-
gram starts.
• You can manually turn on and operate the
VCR before the set times, but the VCR
starts an automatic timer recording only if
the power is off at the set start time.
SELE CT START DATE
WEEKLY --:-- --:-- --
SUN
DATE START STOP CH
SLP
: PUSH SET
TO END PUSH PROG KEY
BY SELECT / KEY
SELE CT START DATE
DAILY --:-- --:-- --
MON-FRI
DATE START STOP CH
SLP
: PUSH SET
TO END PUSH PROG KEY
BY SELECT / KEY
16-548.fm Page 31 Tuesday, July 20, 1999 4:54 PM