Onkyo TX-NR3008 - Manual (Page 78)

78
En
USB can be used to play music files stored on USB mass
storage devices (e.g., USB flash drives and MP3 players),
which can be plugged into the AV receiver’s USB port.
Supported Audio File Formats
For USB mass storage device playback, the AV receiver
supports music file formats.
See “Supported Audio File Formats” (
➔
74).
USB Mass Storage Device Requirements
• The AV receiver supports USB devices that support the
USB mass storage device class.
• Playback may not be possible with some USB devices
even if they conform to the USB mass storage device
class.
• USB devices formatted with the FAT16 or FAT32 file
system are supported.
• If the storage device has been partitioned, each section
will be treated as an independent device.
• Each folder may contain up to 20000 music files and
folders, and folders may be nested up to 16 levels deep.
• USB hubs and USB devices with hub functions are not
supported.
Playing Music Files on a USB Device
This section explains how to play music files on a USB
mass storage device.
About USB
See “Controlling iPod” for iPod connection (
➔
86).
USB port
USB port (TX-NR5008)
1
Plug your USB mass storage device into the AV
receiver’s
USB port.
2
(TX-NR5008)
Press NET/USB repeatedly to select the
“USB(Front)” or “USB(Rear)” screen.
(TX-NR3008)
Press NET/USB repeatedly to select the “USB”
screen.
The USB indicator lights ( ➔ 9) if the AV receiver is
able to read the USB mass storage device. The USB
indicator flashes if the AV receiver cannot read the
USB mass storage device.
3
Use / to select a USB mass storage device, and
then press
ENTER.
A list of the device’s contents appears.
To open a folder, use / to select it, and then press
ENTER.
NET/USB
DISPLAY
ENTER
/ / /
RETURN
, , , ,
, ,
RANDOM
REPEAT
USB(Front)
USB Storage
1 / 1
USB Storage
Folder1
Folder2
01_Song_Track1
02_Song_Track2
03_Song_Track3
04_Song_Track4
05_Song_Track5
06_Song_Track6
07_Song_Track7
08_Song_Track8
1 / 10