Oregon Vertical/Horizontal 22 Ton Log Splitter S402022H0/S402022K0 - Manual (Page 9)

ASSEMBLY INSTRUCTIONS
NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it become
necessary to disassemble the unit for repair or replacement of parts.
STEP 1: Remove all the components from the shipping container.Inspect each piece for shipping damage. If any part is
damaged, contact your dealer or delivering carrier.
STEP 2: Attach the two wheels (1) to the tank assembly wheel spindles using the 3/4” light flat washers(2) ,3/4” NF
slotted nuts (3), 1/8” x 1-1/2” cotter pins (4) and the hub caps (5). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
Page 7
ITEM NO. DECSRIPTION QTY.
1 Road-Speed Tire and Wheel 2
2 Hardware Kit (not shown) 1
3 Tongue Assembly 1
4 Tank Assembly 1
5 Beam Lock Assembly 1
6 Beam Assembly 1
ITEM NO.. DESCRIPTION QTY.
1 Tire and Wheel 2
2 3/4” Light Flat Washer 2
3 3/4” Slotted Nut 2
4 1/8” x 1-1/2” Cotter Pin 2
5 Hub Cap 2
O/L- Obtain locally. Common fasteners available through hard-
ware and farm stores.