Onkyo BD-SP308 - Manual (Page 11)

11
En
Installation
Connecting to Your TV
Make one of the following connections, depending on the
capabilities of your existing equipment.
• HDMI connection (
➔
11)
• Component Video connection (
➔
12)
• Video/Audio (Left/Right) Connection (
➔
13)
Note
• Depending on your TV and other equipment you wish to con-
nect, there are various ways you could connect the player. Use
only one of the connections described in this manual.
• Please refer to the manuals of your TV, Stereo System or other
devices as necessary to make the best connections.
• Do not connect the player’s ANALOG AUDIO OUTPUT jack
to the phono in jack (record player) of your audio system.
• Do not connect your player via your VCR. The image could be
distorted by the copy protection system.
If you have a HDMI TV or monitor, you can connect it to
this player using a HDMI cable (Type A, Version 1.3).
Connect the HDMI jack on the player to the HDMI OUT
jack on a HDMI compatible TV or monitor.
HDMI Connection
Set the TV’s source to HDMI (refer to TV’s Owner’s man-
ual).
HDMI-DVI Connection
Note
• If a connected HDMI device does not accept the audio output of
the player, the HDMI device’s audio sound may be distorted or
may not output.
• When you use HDMI connection, you can change the resolution
for the HDMI output. Refer to “Resolution Setting” (
➔
13).
• Select the type of video output from the HDMI OUT jack using
“HDMI Color Setting” option on the “Setup” menu (
➔ 20).
• Changing the resolution when the connection has already been
established may result in malfunctions. To solve the problem,
turn off the player and then turn it on again.
• When the HDMI connection with HDCP is not verified, TV
screen is changed to black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
• If there are noises or lines on the screen, please check the HDMI
cable (length is generally limited to 4.5 m).
HDMI Connection
this unit
HDMI cable
TV
L R
DVI IN
this unit
Audio cable
TV
HDMI-DVI
cable