Onkyo BD-SP308 - Manual (Page 12)

12
En
■
Additional Information for HDMI
• When you connect a HDMI or DVI compatible device,
make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device and
leave it for around 30 seconds, then switch on this
player.
- The connected device’s video input is set correctly for
this unit.
- The connected device is compatible with 720x480p,
1280x720p, 1920x1080i or 1920x1080p video input.
• Not all HDCP-compatible HDMI or DVI devices will
work with this player.
- The picture will not be displayed properly with non-
HDCP device.
- This player does not playback and TV screen is
changed to black screen.
Connect the VIDEO OUTPUT (COMPONENT) jacks
on the player to the corresponding input jacks on the TV
using component video cable. Connect the left and right
ANALOG AUDIO OUTPUT jacks of the player to the
audio left and right IN jacks on the TV using the audio
cables.
Component Video/Audio Connection
Note
• When you use VIDEO OUTPUT (COMPONENT) connection,
you can change the resolution for the output. Refer to “Resolu-
tion Setting” (
➔ 13).
Component Video Connection
L Y P B P R R
this unit
Component video
cable
TV
Audio cable