Onkyo BD-SP308 - Manual (Page 40)

40
En
Video Output Resolution
■
When the non-copy protected media is playing back
■
When the copy protected media is playing back (DVD, etc.)
HDMI OUT connection
• If you select a resolution manually and then connect the
HDMI jack to TV and your TV does not accept it, the
resolution setting is set to “Auto”.
• If you select a resolution that your TV does not accept,
the warning message will appear. After resolution
change, if you cannot see the screen, please wait 20 sec-
onds and the resolution will automatically revert back to
the previous resolution.
• The 1080p video output frame rate may be automatically
set to either 24 Hz or 60 Hz depending both on the capa-
bility and preference of the connected TV and based on
the native video frame rate of the content on the
BD-ROM disc.
COMPONENT VIDEO OUT Connection
BD and DVD video stream could prevent up-scaling on
analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always output
at 480i resolution.
HDMI OUT COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
480i 480p 480i
480p 480p 480p
720p 720p 720p
1080i 1080i 1080i
1080p 24 Hz 1080p 24 Hz 480i 1080i
1080p 60 Hz 1080p 60 Hz 480i 1080i
HDMI OUT COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
480i 480p 480i
480p 480p 480p
720p 720p 480i 480p
1080i 1080i 480i 480p
1080p 24 Hz 1080p 24 Hz 480i 480p
1080p 60 Hz 1080p 60 Hz 480i 480p
Video Out
Resolution
Video Out
Resolution