Olympus DM-420 - Manual (Page 18)

18
1
Turning off the power
Slide the POWER/HOLD switch in the
direction indicated by the arrow for
0.5 seconds or longer.
• The display will turn on, and the power will
be turned on.
Turning on/off the power
When the recorder is not being used,
turn the power off to reduce battery
consumption to a minimum. Even if
the power is turned off, existing data,
mode settings, and clock settings will be
maintained.
Turning on the power
While the recorder’s power is off,
slide the POWER/HOLD switch in the
direction indicated by the arrow.
Power supply
• The display shuts off, and the power will
be turned off.
• The resume function remembers the stop
position before the power is turned off.
Power save mode
If the recorder is on and stops for 10 minutes
or longer (default), the display shuts off and
it goes into power save mode. You can
set the time to enter power save mode
from among [5minutes], [10minutes],
[30minutes], [1hour] and [Off] (☞ P.54).
To exit power save, press any button.
Po
w
er s
up
ply