Olympus DM-420 - Manual (Page 35)

5
3
To EAR
jack
Pla
yb
ac
k
While the recorder is during
playback mode, press the 0
button twice.
• The recorder skips to the beginning of the
previous file.
Notes
• When you skip to the beginning of the file
during playback, the recorder will stop at
the position of the index mark and temp
mark. The index mark and temp mark
will be skipped when you perform the
operation in stop mode (☞ P. 38).
• When [Skip Space] set to other than
[File Skip], the recorder will skip forward/
reverse the specified time, then will start
playback (☞ P. 52).
Playback through earphone
An earphone can be connected to the EAR
jack of the recorder for listening.
• When the earphone is used, the recorder
speaker will be switched-off.
Notes
• To avoid irritation to the ear, insert the
earphone after turning down the volume
level.
• When you listen with the earphone during
playback, do not raise the volume too
much. It may cause hearing impairment
and decrease in hearing ability.
Settings relating to playback
[Segment
repeat]
(☞ P.40)
This function enables
repeated playback of part of
the file being played.
[Replace]
(☞ P.56)
This changes the order of the
files in the selected folder. It
is useful for playing back files
in a preferred order while in
normal playback mode etc.
[Noise Cancel]
(☞ P.50)
If recorded audio is difficult
to understand because of
noisy surroundings, adjust
the Noise Cancel setting
level.
[EUPHONY]
(☞ P.50)
Level adjustments of
the [EUPHONY] setting can
be set to four stages accord-
ing to preference.
[Voice Filter]
(☞ P.50)
The recorder has a Voice
Filter Function to cut low
and high frequency tones
during normal, fast, or slow
playback, and enable clear
audio playback.
[Play Mode]
(☞ P.50)
You can select the playback
mode that fits your prefer-
ence.
[Play Speed]
(☞ P.51)
The playback speed can be
set to slow speed or fast
speed playback.
[Skip Space]
(☞ P.52)
The skip interval length can
be set.
[Alarm]
(☞ P.52)
The alarm playback function
can be set to play a selected
file at a pre-set time.
[Play Scene]
(☞ P.52)
Playback settings of your
choice can be saved to suit
different sound qualities and
playback methods.
[Intro Play]
(For DM-520)
(☞ P.53)
You can listen to the first few
seconds of a file by touching
the cursor to a file within a
folder.
Playback