Olympus DM-420 - Manual (Page 43)

4
3
Era
sin
g
1 Play the file you want to partial
erase.
• Forward a file to the position that
shall be erased. If the file is long,
use the 9 button to move to the
position you want to delete.
2 At the starting position of the
partial erase, press the ERASE
button.
• [Erase start] will flash on the display.
Partially erase a file
(For DM-520)
Only a PCM file recorded in the recorder can
be partially erased.
3 Press the ERASE button again.
• [Start point] and [End point] on
the display flash alternatively. When
the lights are flashing, playback
continues and you can rewind or fast-
forward as usual and fast-forward to
the end of erase. If the file reaches the
end during the flashing of the lights,
that will be the position where erase
ends.
4 At the position you want to end
partial erase, press the ERASE
button again.
• The display will switch to [Partial
erasing !] and start the partial
erase. The deletion is completed
when [Partial erase completed.] is
displayed.
• Playback will stop at the end location
of the partial erase.
Notes
• Partial erase is not applicable to files
recorded in the WMA or MP3 formats.
• The File Created Date will not change even
if the file is partially erased.
Erasing