Onkyo AV Receiver TX-NR818 - Manual (Page 12)

Safety Information and Introduction
En-12
Remote Controller
For detailed information, see the pages in parentheses.
RECEIVER button ( 23 )
ACTIVITIES buttons ( 50 )
REMOTE MODE/INPUT SELECTOR buttons ( 26 )
SP (speaker layout) button ( 49 )
// / and ENTER buttons
Q SETUP button ( 51 )
Listening Mode buttons ( 40 )
DIMMER button ( 48 )
DISPLAY button ( 48 )
MUTING button ( 49 )
VOL / button ( 26 )
RETURN button
HOME button ( 47 )
SLEEP button ( 48 )
■ Controlling the tuner
To control the AV receiver’s tuner, press TUNER (or
RECEIVER).
You can select AM or FM by pressing TUNER repeatedly.
/ buttons ( 34 )
D.TUN button ( 34 )
DISPLAY button
CH +/– button ( 35 )
Number buttons ( 34 )
*1 When you want to change the remote controller mode (target
component) without changing the current input source, press
MODE and within about 8 seconds, press REMOTE MODE.
Then, using the same AV receiver’s remote controller, you can
control the component corresponding to the button you
pressed.
*2 These buttons can also be used when a REMOTE MODE
other than Receiver mode is selected.
Controlling the AV Receiver
*1
*2
*2
To control the AV receiver, press RECEIVER to select
Receiver mode.
You can also use the remote controller to control
Onkyo Blu-ray Disc/DVD player, CD player, and
other components.
See “Entering Remote Control Codes” for more
details (
➔ page 85 ).