En-41 – Onkyo AV Receiver TX-NR818 User Manual
Page 41
Turning On & Basic Operations
En-41
Input Source
The following audio formats are supported by the listening
modes.
Speaker Layout
The illustration shows which speakers are activated in each
channel. See “Speaker Configuration” for the speaker setup
(
*1
Press RECEIVER followed by SP (speaker layout) repeatedly
to select the speakers you want to use: front high, front wide,
or surround back.
*2
After enabling the corresponding speakers, press RECEIVER
followed by SP (speaker layout) repeatedly to select the layout
you want to use. These layouts are only available when
“Preout to External Amplifier” (
) is enabled.
This is mono (monophonic) sound.
This is stereo (stereophonic) sound. Two
independent audio signal channels are reproduced
through two speakers.
This is 5.1-channel surround sound. This surround
system has five main channels of sound and a sixth
subwoofer channel (called the point-one channel).
This is 7.1-channel surround sound. This is a
further sound enhancement to 5.1-channel sound
with two additional speakers that provide greater
sound envelopment and more accurate positioning
of sounds.
This is DTS-ES surround sound. This surround
system can produce a discrete or a matrix-encoded
sixth channel from existing DTS 5.1 encoded
material.
This is Dolby Digital EX surround sound. This
provides a center back surround channel from 5.1-
channel sources.
Listening mode buttons
SP (speaker layout)