Unpacking, Set up instructions – One Stop Gardens 98197 User Manual
Page 4
Page 4
SKU 98197
for technical questions, please call 1-800-444-3353.
specificatiOns
Hopper capacity
12 Cubic Feet
Brushes
18-1/4” x 3-1/2”
Wheels
Solid rubber, all
terrain tread
Net Weight
73.8 Lbs.
unpacking
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
set up instructiOns
read the entire iMpOrtant
safety instructiOns
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
assembly
Due to the weight of the Lawn and
1.
Leaf Sweeper, it is recommended
that an additional adult assist in as-
sembly and set-up.
Assembly of the Lawn and Leaf
2.
Sweeper will require use of the fol-
lowing tools (not included): hex
wrenches, standard screwdriver and
pliers.
sweeper Housing
Sweeper
Housing
Hitch Tongue (65)
Flat Washer (54)
Hex Lock
Nut (18)
figure 1
Carriage
Bolt (67)
Skirt (4)
1. Locate each of the 5/16” Hex lock
Nuts (18) and 5/16” Flat Washers
(54).
Secure the Hitch Tongue (65) to the
2.
Skirt (4) on the sweeper housing.
Insert the 5/16” x 1-1/2” Carriage
Bolts (67) inserted so that the bolt
heads are on the inside of the hous-
ing. Slide on Flat Washers (54), and
thread on Hex Lock Nuts (18). Hand
tighten in place-see Figure 1.
Flat
Washer (54)
Hex Lock
Nut (18)
Carriage
Bolt (29)
Brace Rod (7)
figure 2
3. Secure the Brace Rod (7) to the
Sweeper Housing. Slide in Carriage
Bolt (29), and secure Brace Rod in