One for All URC-9910 - Manual (Page 30)

USING THE HOME THEATER MODE
The URC-9910 remote control includes a custom Home Theater
mode.After the HOME THEATER key is programmed, it will allow you
to access five groups of remote control keys without having to
change device modes. However, there are some considerations.
• Keymoved and Learned functions, as well Macros programmed
onto keys other than the dedicated macro keys (M1 ~ M3), are
affected by the Home Theater mode. If keys are moved (using
Keymover) or learned onto (using Learning) and they are placed
on keys not within the Control Groups, the keys will be ignored
when pressed.
• A Macro on the POWER key (if applicable) will carry over to the
Home Theater mode.
Control Organization
About Control Groups
For Home Theater programming, the URC-9910 remote control’s
keys are grouped by type of control into the following five
control groups:
(1) Playback Controls: PLAY, STOP, FWD, REW, F.FWD, F.REW,
PAUSE and REC
(2) Audio Controls: VOL+, VOL- and MUTE
(3) Channel Controls: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,
SLEEP, INFO and TV/VID
(4) Menu Controls: MENU, GUIDE, Cursor Controls ( ▲ , ▼ , , ),
SELECT and EXIT
(5) PIP Controls: PIP, MOVE and SWAP
About Device Groups
Moreover, the URC-9910 remote control’s devices are grouped into
the following five device groups:
(1) Playback Group: VCR, DVD, CD, CBL, SAT and RCVR/AMP
(2) Audio Group: TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP and
AUX
(3) Channel Group: TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP and
AUX
(4) Menu Group: TV, VCR, CBL, SAT and DVD
(5) PIP Group: TV, VCR, CBL and SAT
continued on next page...
▲
▲
43