Oki B6250 - Manual (Page 77)

B6250 User’s Guide> 77
Sys Adjust Menu
The Sys Adjust Menu provides access to the tray adjustment
settings. Use the following procedure to enter the Sys Adjust menu:
1. Press the MENU button on the control panel.
2. Press the < > button until the text “Sys Adjust Menu” is
shown on the first line of the display.
3. Press the < > button to enter the Sys Adjust menu.
4. Press the
< > or < >
button to move through the submenus.
5. Press the < > button to enter the submenu.
Use the procedures in the following table to access and change the
Sys Adjust Menu settings:
Submenus Default
Setting Available
Settings Procedure for
Changing Setting
Tray1 X Adjust
This submenu
fine adjusts the
registration in
the X axis.
8 0 to 15
Press < > (increase
number) to move the image
to the right or press < >
(decrease number) to move
the image to the left.
Press <SELECT> to save the
selection.
Tray1 Y Adjust
This submenu
fine adjusts the
registration in
the Y axis.
8 0 to 15
Press < > (increase
number) to move the image
to the down or press < >
(decrease number) to move
the image to the up.
Press <SELECT> to save the
selection.
Tray2 X Adjust
This submenu
fine adjusts the
registration in
the X axis.
8 0 to 15
Press < > (increase
number) to move the image
to the right or press < >
(decrease number) to move
the image to the left.
Press <SELECT> to save the
selection.