SUUNTO Vector HR - Manual (Page 50)

43
note: during calibration, it is not necessary that all peripheral segments light up or turn off.
note: If the text “faIl” appears in field 2 (fig. 60), the battery should be removed and put back in before trying to proceed with the
calibration process. the removal of the battery will “reset” the unit.
5. once the calibration is successful, press the [mode] button to accept the process and exit the calibration mode.
note: It is important to hold the Wristop computer level during the calibration process to ensure accuracy.
the compass calibration is complete.
CHaPTeR 7 fRequenTly asked quesTIons
7.1 geneRal
7.1.1 Is the Wristop Computer waterproof?
yes, it is waterproof to a depth of 30 meters (00 ft). rain and other normal exposure to water will not effect its operation. you can swim
wearing your Wristop computer. However, the Wristop computer is not a diving device.
7.1.2 How long will the battery last?
all users employ the product in different ways. Battery life depends mainly on how much the backlight, the compass and the logbook
are used. the low-battery warning symbol appears on the display when 5 to 5 percent of battery capacity remains. this should give
the user plenty of time to safely change the battery.
7.1.3 What do the segments on the circumference mean?
In the altimeter mode, one full circle equals ,000 meters or ,000 feet. therefore the segments on the circumference graphically show
the user the altitude over a full thousand. When using the difference measurement function of the altimeter, the segments indicate the
vertical difference in the elevation over a full thousand either to the right if you’re ascending or to the left if you’re descending.
In the Barometer mode, one full circle equals 00 mbar or  inHg, and the segments indicate the pressure over a full hundred mbar or
over a full inHg. When using the difference measurement function of the barometer, the segments indicate the change in atmospheric
pressure either to the right if the pressure has risen or to the left if the pressure has dropped.
In the main compass mode, the segments indicate the north, i.e. the one segment indicates north and the three segments point south.