13 positioning speakers/connecting speakers, How to connect to the front speakers b terminals, Connecting to speakers a connecting to speakers b – Onkyo TX-SR500E User Manual

Page 13

Advertising
background image

13

Positioning speakers/Connecting speakers

Before connecting

• Refer also to the instruction manuals of the speakers.

• Be sure to connect the positive and negative cables for the

speakers properly. If they are mixed up, the left and right
signals will be reversed and the audio will sound unnatural.

• Connect speakers with an impedance between 6

Ω and 16 Ω

Connecting speakers with an impedance less than 6

Ω may

damage the TX-SR500/TX-SR500E.

• To prevent damage to circuits, never short-circuit the positive

(+) and negative (–) speaker wires.

REMOTE

CONTROL

R

L

R

L

R

L

IN

IN

IN

COAXIAL

OPTICAL

1

2

IN

IN

IN

IN

FRONT

SURR

CENTER

SUB

WOOFER

VIDEO 2

VIDEO 1

OUT

OUT

OUT

DIGITAL INPUT

VIDEO 2

VIDEO 1

DVD

MONITOR

OUT

VIDEO

S VIDEO

DVD

TAPE

CD

FRONT

SPEAKERS A

FRONT

SPEAKERS B

SURROUND

SPEAKERS

CENTER
SPEAKER

L

R

L

R

AC OUTLET

ANTENNA

FM

75

AM

SUBWOOFER

PRE OUT

Center

speaker

Active

subwoofer

Front right

speakers

How to connect to the FRONT SPEAKERS A,
SURROUND SPEAKERS and CENTER
SPEAKER teminals

Loosen the
screw.

Fully insert the
end of the
cable.

Tighten the
screw.

• Do not connect more than one speaker cable to one speaker

terminal. Doing so may damage the TX-SR500/TX-SR500E.

• When you are using only one speaker or when you wish to

listen to monaural (mono) sound, a single speaker should never
be connected in parallel to both the right and left channel
terminals simultaneously.

NO!

NO!

NO!

Press and hold
the lever.

Insert the stripped
end of the cable.

By releasing the
lever, the lever is
replaced.

How to connect to the FRONT SPEAKERS B
terminals

5/8” (15 mm)

3/8” (10 mm)

Strip 5/8” (15 mm) from the end of each
cable, then twist the exposed wires tightly.

Strip 3/8” (10 mm)
from the end of
each cable, then
twist the exposed
wires tightly.

Use the SUBWOOFER PRE OUT
jack to connect a subwoofer with a
built-in power amplifier.

If your subwoofer does not have a
built-in amplifier, connect an
amplifier to the SUBWOOFER PRE
OUT jack and the subwoofer to the
amplifier.

R

L

R

L

Front left
speakers

Surround

right

speakers

Surround

left

speakers

Front right

speakers

Front left
speakers

DO NOT connect the
power cord (mains
lead) at this time.

Connecting to SPEAKERS A

Connecting to SPEAKERS B

Advertising