Onkyo TX-SR500E User Manual
Page 9
9
1
-
0
=
~
#
2
3
4
5
6
7
9
8
!
@
Explanations on this page are for controlling the TX-SR500/
TX-SR500E. To operate other components, see “Using remote
controller” on pages 34 through 35, and “Pre-programming remote
controller (North American models only)” on pages 36 and 37.
For operational instructions, refer to the page indicated in brackets.
1
SLEEP button [27]
For setting the sleep time.
This button is provided only on the remote controller.
2
STANDBY/ON button [17]
Turns on the TX-SR500/TX-SR500E or put it in standby.
3
Listening mode buttons [32]
Press to change the listening mode.
4
CINE FLTR button [29]
Press to activate/de-activate Cinema Filter function.
5
LATE NIGHT button [29]
Press to change the late night setting.
6
TEST/CH SEL/LEVEL
5/∞ buttons [20, 28]
For setting the output levels for each speaker.
These buttons are provided only on the remote controller.
7
AUDIO SEL button [28]
Press to select an audio input signal format other than TUNER.
8
INPUT SELECTOR buttons [21-25, 28, 33]
For selecting the input source.
9
MUTING button [26]
Activates the mute function.
This button is provided only on the remote controller.
0
PRESET
2/3 button [25]
For selecting a tuner preset channel.
-
DIMMER button [27]
For adjusting the brightness of the front display.
=
Mode buttons [34-37]
For selecting the component to be operated by the remote
controller.
~
SP A/SP B buttons [21, 26]
Press to switch the speaker systems in use between A and B.
!
AUDIO ADJUST button [29]
Press to adjust bass, treble, late night function and cinema filter
function setting.
@
ADJUST
2/3 button [29]
Press to adjust the values and parameters of the mode selected
using the AUDIO ADJUST, SPEAKER ADJUST or AUDIO
SELECTOR button.
#
VOLUME
5/∞ button [21, 24]
For adjusting the volume.
RC-478M (For North American models)
RC-479S (For models other than North American
models)
Index to parts and controls
1
-
0
=
~
#
2
3
4
5
6
7
9
8
!
@