1 unpacking – TANDBERG D1389801 User Manual
Page 13
3
2.1 Unpacking
To avoid damage to the unit during transportation, the Content Server is delivered in a special
shipping box, which should contain the following components:
User Manual and other documentation on CD.
Rack-ears, screws and screwdriver.
Cables:
o Power
cable
o Ethernet
cable
TANDBERG
Content
Server
Installation site preparations
Make sure that the Content Server is accessible and that all cables can be easily
connected.
For ventilation: Leave a space of at least 10cm (4 inches) behind the Content Server’s
rear panel and 10cm (4 inches) in front of the front panel.
The room in which you install the Content Server should have an ambient temperature
between 0
º
C and 35
º
C (32
º
F and 95
º
F) and between 10% and 90% non-condensing
relative humidity.
Do not place heavy objects directly on top of the Content Server.
Do not place hot objects directly on top, or directly beneath the Content Server.
Use a grounded AC power outlet for the Content Server.
Rack Mounting (optional)
The Content Server comes with rubber feet for standalone installation and brackets for mounting
in standard 19” racks.
Before starting the rack mounting please make sure the TANDBERG Content Server is placed
securely on a hard flat surface.
1. Disconnect the AC power cable.
2. Make sure that the mounting space is prepared according to the ‘Installation site
preparations’ above.
3. Attach the brackets to the Content Server on both sides of the unit.