TANDBERG D1389801 - Manual (Page 25)

15
4.1.1 Content Server Properties
This menu item contains the following settings:
ƒ System Name
ƒ H.323 Address
ƒ H.323 Listen Port
ƒ Content Library Host Name
ƒ Database Source
ƒ Restart Service
System Name
Other systems can call in using this name instead of IP-
number/IP-address. System Name is also used for registering
with a gatekeeper.
H.323 Address The default for the Content Server installation is (local). It is
recommended to leave the H.323 address in the Site Settings as
(local), unless instructed otherwise by TANDBERG support.
H.323 Listen
Port Standard videoconferencing port. Users only need to change this
setting if the local videoconferencing port at customer site is set
to a different port.
Content Library
Host Name The default for the Content Server installation is (local). It is
recommended to leave the Content Library Host Name in the Site
Settings as (local), unless instructed otherwise by TANDBERG
support.
Database
Source By default, the Database Source is set to (local). To optimize the
performance of the Content Server, it is strongly recommended
that the administrator changes the Database Source to the
<Machine name> (which can be set up from the Windows SAK
at the time of installation).
Restart Service If the TANDBERG Content Server is not responding, restart the
Service here. This will only affect calls that are currently live (that
is, the calls will be ended and conferences will not be available