Installing the driver for windows, 3 − installation – Tascam US-1800 User Manual

Page 10

Advertising
background image

10

TASCAM US-1800

CAUTION

Handle the enclosed CD-ROM with care. If the disc

becomes scratched or dirty, your computer may be unable

to read it and the software cannot be installed. If the

disc becomes unreadable, a fee will be charged for its

replacement.
Never attempt to play the enclosed CD-ROM in a

conventional audio CD player, as the resulting noise may

damage your speakers or your hearing.

Installing the driver for Windows

NOTE

During driver installation, a warning that “this software

... has not passed Windows Logo testing“ will appear.

This message appears when a driver that has not

received Windows Logo testing is installed. This message

appears because the drivers for TASCAM products have

not received Windows Logo testing. We have, however,

confirmed their proper operation. If this message appears,

click Continue to proceed with the installation.
During installation, you must connect the unit in step 7.

You should complete each of these installation steps in

less than one minute. Installation may fail if you take too

much time.

1 Confirm that the unit and the PC are not connected

by the USB cable.

2 Insert the included driver installation CD-ROM into

the PC where you will install it.

3 Click the Install Driver button when the screen

below appears. (If this screen does not appear

automatically, find and open the Autorun2.exe

program in the Autorun folder on the driver CD-

ROM.)

4 When the language selection screen (below)

appears, select the language you prefer and then

click the OK button.

5 Click the Install the Driver button when the screen

below appears.

6 Read the contents of the License Agreement,

and select I accept the agreement if you agree to

the terms. Next, click the Install button to start

installation.

7 When the screen below appears, use the supplied

USB cable to connect the unit to the PC. Then, turn

the unit on.

8 When the screen below appears, the installation

is complete. Click the Reboot now button to restart

the PC to use the driver.

3 − Installation

Advertising