Tascam US-1800 - Manual (Page 15)

TASCAM US-1800
15
6 – Application Guide
In this chapter, we explain how to set some audio
applications for use with this unit.
Cubase LE 5
For details see the provided Cubase LE 5 Quick Start
Guide.
Windows XP and Windows Media
Player
1 Close all applications and then open the Control
Panel from the Start menu.
2 Open Sounds and Audio Devices.
NOTE
If you do not see either of the items above, click “Sounds,
Speech, and Audio Devices” and one will appear.
3 Click the Audio tab, and set the Default device: for
Sound playback to TASCAM US-1800.
4 Click OK.
5 Start Windows Media Player, select an audio file
and begin playback.
NOTE
If you change the setting while Windows Media Player is •
running, the software will not recognize that the device
has been changed. In this case, restart Windows Media
Player.
If you still cannot hear sound after making the settings
•
and completing the procedures above, restart the
computer.
If you make this setting, sound will be output through •
this unit, but no sound will be output by the computer’s
speakers or headphone jack.
Windows Vista/Windows 7 and
Windows Media Player
1 Close all applications and then open the Control
Panel from the Start menu.
2 Open Sound.
NOTE
If the above item does not appear, click “Hardware and
Sound” and it will appear.
3 Click the Playback tab, click Speakers TASCAM US-1800
and click the Set Default button. This moves the
green check mark to Speakers TASCAM US-1800.
4 Click OK.
5 Start Windows Media Player, select an audio file
and begin playback.
NOTE
If you change the setting while Windows Media Player is •
running, the software will not recognize that the device
has been changed. In this case, restart Windows Media
Player.
If you still cannot hear sound after making the settings
•
and completing the procedures above, restart the
computer.
If you make this setting, sound will be output through
•
this unit, but no sound will be output by the computer’s
speakers or headphone jack.