Transition Networks CPSMP-200 - Manual (Page 6)

CPSMP-200
10 Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours)
Troubleshooting
If the power supply module fails, isolate and correct the failure by determining
the answers to the following questions and then taking the indicated action:
1. Is the Power LED on the CPSMP-200 power supply module
illuminated?
NO
• Is the power supply module inserted properly into the chassis?
• Is the power supply module properly connected to the external
power source?
• Does the external power source provide power?
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Proceed to step 2.
2. Is the fuse on the CPSMP-200 power supply intact?
NO
• CAUTION: See the “Replace the Fuse” section (page 8) for the
proper method for replacing the fuse to the power supply module.
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
YES
• Contact Technical Support: US/Canada: 1-800-260-1312,
International: 00-1-952-941-7600.
[email protected] -- Click the “Transition Now” link for a live Web chat. 11
Contact Us
Technical Support
Technical support is available 24 hours a day.
US and Canada:
1-800-260-1312
International: 00-1-952-941-7600
Transition Now
Chat live via the Web with Transition Networks Technical Support.
Log onto www.transition.com and click the Transition Now link.
Web-Based Seminars
Transition Networks provides seminars via live web-based training.
Log onto www.transition.com and click the Learning Center link.
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
[email protected]
Address
Transition Networks; 6475 City West Parkway; Minneapolis, MN 55344, USA
telephone: 952-941-7600; toll free: 800-526-9267; fax: 952-941-2322
Declaration of Conformity
Name of Mfg: Transition Networks
6475 City West Parkway, Minneapolis MN 55344 USA
Model: CPSMP-200 Redundant Power Supply 120/240 VAC
Part Number(s): CPSMP-200
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the CPSMP-200 to which this declaration refers is in
conformity with the following standards.
CISPR 22:1997+A1:2000; EN 55022:1998 + A1:2000 Class A&B; EN 55024:1998;
FCC Part 15 Subpart B; EN61000-3-2:1995+A14:2000; EN61000-3-3:1995
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
_July 8, 2000_____
Stephen Anderson, Vice-President of Engineering Date