Pull drawer to fully open position, Press down right drawer clip, Lift up left drawer clip – Thermador WD27 User Manual

Page 13: Be sure cabinet rails are pushed inside cabinet, Align the drawer rails with the cabinet rails, Maintenance

Advertising
background image

English 10

Maintenance

Removing the Drawer

1. Pull drawer to fully open position.
2. Press down right drawer clip.
3. Lift up left drawer clip.
4. Firmly pull the drawer straight out. Retract cabinet rails while drawer is

removed.

Replacing the Drawer

1. Be sure cabinet rails are pushed inside cabinet.
2. Align the drawer rails with the cabinet rails.
3. Firmly push the drawer straight into the cabinet until drawer clicks into place.
4. Open and close drawer to test operation. Note: if the drawer will not close, verify

that the rail clips are properly positioned.

m

WARNING:

To prevent burns, do not remove drawer while hot. Be sure drawer is
empty before removing.

Low

High

_

Med

Proof

+

On/O

ff

Advertising
This manual is related to the following products: