Telex PAM-32 - Manual (Page 26)

PAM-32 Menu System
24
8 hr
10 hr
12 hr
Service Menu, Test Panel
Test Panel PGM lets you check the operation of all keys and displays.
All alphanumeric displays show a% symbol. Pressing down on any key (except the Headset/Vol Sel. key) will cause OK to
display. This verifies operation of the key. Tapping on the Headset/Vol.Sel. key will cause the display to cycle through the
available selections.
If latching is enabled, tapping any intercom key, or the Call waiting key, will cause the corresponding re LED to light. This
verifies latching operation and also that each red LED is OK>
Holing any key will cause the corresponding green LED to light. This verifies operation of the green LEDs.
Tapping any keypad button (except CLR) will cause the keypad button name to appear in the Call Waiting Window. This
verifies operation of the keypad buttons.
Tap CLR to quit.