Telex PAM-32 - Manual (Page 7)

5
Specifications
Specifications
The PAM-32 is a 32-key (push button) monitor panel, with both headset and speaker outputs.
General
AC Supply: External, switching type, 100-240 VAC, 50/60 Hz with locking DIN connector for attachment to the keypanel and
universal IEC connector for connection to various AC mains cords.
Connectors (other connector options available)
Headset Connector Type: 3-circuit, 1/4” phone jack with
threaded metal bushing
Pin Out
Pin 1................................................................ Audio side A+
Pin 2................................................................ Audio side B+
Pin 3........................................................................... Ground
Environmental
Storage
-40°C to 60°C (-40°F to 140°F)
Operating
-10°C to 41°C (14°F to 105.8°F)
Dimensions
19” wide x 2RU x 3.5” (90mm) deep
Physical
Height
2 RU
Mounting Depth Needed (approx.)
7”
Headphone Amplifier
Max Voltage Gain
200dB
Frequency Response
100Hz to 10kHz, ±2dB
Headphone Impedance
8 to 600 ohms
Output Power
160mW into 50 ohms
Output Voltage Level
8 volts peak to peak (max.)
Sidetone Range
25dB
Speaker Amplifier and Speaker
Frequency Response
100Hz to 10kHz, ±2dB
Output Power (per amplifier)
11.3 volts peak to peak (max.)
Volume Control Range
30dB
Speaker Rating
4 watts max.
Intercom Inputs (Side A)
Input
Nominal
+8dBu
Peak
±20dBu max.
Aux Inputs (Side B)
Input Level
+8dBu nominal