Telex PAM-32 - Manual (Page 8)

Introduction
6
Power Input Connector
Type: 5-pin locking DIN
Pin Out
Pin 1 Common
Pin 2 Common
Pin 3 +5 VDC, 1.50A max.
Pin 4 -15 VDC, 0.150A max.
Pin 5 +15 VDC, 0.5A max.
Intercom Connectors: Parallel-wired DE9S and RJ-12 Connectors
Type DE9S
Pin Out
Pin 1 Data +
Pin 2 Data -
Pin 3 Audio In (from Matrix) shield
Pin 4 Audio Out (to Matrix) +
Pin 5 Audio Out (to Matrix) -
Pin 6 Data Shield
Pin 7 Audio In (from Matrix) -
Pin 8 Audio In (from Matrix) +
Pin 9 Audio Out (to Matrix) shield
Type RJ-12
Pin Out
Pin 1 Data -
Pin 2 Audio In (from Matrix) -
Pin 3 Audio Out (to Matrix) +
Pin 4 Audio Out (to Matrix) -
Pin 5 Audio In (from Matrix) -
Pin 6 Data +
Expansion Connector
Type RJ-45
LCP Connector
Type RJ-45
Foot Switch / Speaker
Type 9-pin Male D-Sub
Pin Out
Pin 1 Ground
Pin 2 Speaker minus (-)
Pin 3 Ground
Pin 4 No Connection
Pin 5 Foot Switch
Pin 6 Speaker plus (+)
Pin 7 No Connection
Pin 8 No Connection
Pin 9 Ground
Matrix Out Balanced Output
Type 3-pin Male XLR
Pin Out
Pin 1 Shield (circuit common)
Pin 2 Audio output +
Pin 3 Audio output -
NOTE: Output level +8dBu nominal (balanced).