Telex MS2002 User Manual
Page 12
Advertising
12
Figure 4 - MS-2002 Binaural Master Speaker Station Configuration.
This is a good configuration for smaller intercom systems when you want to operate the MS-2002 as a master speaker station, with
a separate speaker for each intercom channel. Make sure the MS-2002 internal DIP switches are set for binaural speaker operation
as described on page 7. Also, set the Combine/Isolate switch to the Isolate position. With this setting the two intercom channesl are
completely separated. The internal amplified speaker is used as the speaker output for channel 1, and the SPK-2000 is used for
channel 2.
Advertising