Telex MS2002 - Manual (Page 2)

2
FCC Statement
This equipment uses, and can radiate radio frequency energy that may cause interference to radio
communications if not installed in accordance with this manual. The equipment has been tested
and found to comply with the limits of a Class A computing device pursuant to Subpart J, Part 15
of FCC Rules which are designed to provide reasonable protection against such interference
when operated in a commercial environment. Operation of this equipment in a residential area
may cause interference which the user (at his own expense) will be required to correct.
This product meets Electromagnetic Compatibility Directive 89/336/EEC
TRADEMARKS
Audiocom
® is a registered trademark of Telex Communications.
(*)Names of other products mentioned herein are used for
identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.
WARRANTY INFORMATION
Products are warranted by Telex Communications, Inc. to be
free from defects in materials and workmanship for a period of
one year from the date of sale.
The sole obligation of Telex during the warranty period is to
provide, without charge, parts and labor necessary to remedy
covered defects appearing in products returned prepaid to
Telex. This warranty does not cover any defect, malfunction or
failure caused beyond the control of Telex, including unreason-
able or negligent operation, abuse, accident, failure to follow
instructions in the manual, defective or improper associated
equipment, attempts at modification and repair not authorized
by Telex, and shipping damage. Products with their serial
numbers removed or effaced are not covered by this warranty.
To obtain warranty service, follow the procedures entitled
“Procedure for Returns” and “ Shipping to Manufacturer for
Repair or Adjustment”.
This warranty is the sole and exclusive express warranty given
with respect to Audiocom products. It is the responsibility of the
user to determine before purchase that this product is suitable
for the user’s intended purpose.
ANY AND ALL IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF MERCHANTABILITY ARE LIMITED
TO THE DURATION OF THIS EXPRESS LIMITED WAR-
RANTY.
NEITHER TELEX NOR THE DEALER WHO SELLS TELEX
PRODUCTS IS LIABLE FOR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES OF ANY KIND.
CUSTOMER SUPPORT
Technical questions should be directed to:
Customer Service Department
Telex
12000 Portland Avenue South
Burnsville, MN 55337 U.S.A
Telephone: (952) 884-4051
Fax: (952) 884-0043
RETURN SHIPPING INSTRUCTIONS
Procedure for Returns
If a return is necessary, contact the dealer where this unit was
purchased.
If a return through the dealer is not possible, obtain a RETURN
AUTHORIZATION from:
Customer Service Department
Telex Communications, Inc.
Telephone: 1-800-392-3497 or (952) 884-4051
Fax: 1-800-323-0498 or (952) 884-0043
DO NOT RETURN ANY EQUIPMENT DIRECTLY TO THE
FACTORY WITHOUT FIRST OBTAINING A RETURN
AUTHORIZATION.
Be prepared to provide the company name, address, phone
number, a person to contact regarding the return, purchase
order number, the type and quantity of equipment, a descrip-
tion of the problem and the serial number(s).
Shipping to Manufacturer for Repair or Adjustment
All shipments of products should be made via United Parcel
Service or the best available shipper prepaid. The equipment
should be shipped in the original packing carton; if that is not
available, use any suitable container that is rigid and of
adequate size. If a substitute container is used, the equipment
should be wrapped in paper and surrounded with at least four
inches of excelsior or similar shock-absorbing material. All
returns must include the return authorization number. Units
sent for repair or adjustment DO NOT need a return authoriza-
tion number
Factory Service department
Telex Communications, Inc.
West 1
st Street
Blue Earth, MN 56013 U.S.A.
Upon completion of any repair the equipment will be returned
via United Parcel Service or specified shipper collect.