Tyco Electronics P7100IP - Manual (Page 25)

MM101332V1, Rev. K
Table 8-1: Display Descriptions
Steady – “Busy” transmitting or receiving
Flashing – call queued
Steady – special call mode (individual or telephone)
Steady – during all radio transmissions
Steady – transmit at low power
If icon is not visible – transmit at high power
Steady – battery charge indicator (refer to Figure 8-8)
Flashing – Low battery indicator (refer to Figure 8-8)
Steady – Indicates the current channel is set up as an analog channel.
Steady – trunked system in Failsoft ™ mode
Steady – group or channel in scan list
Steady – priority 2 group or channel
Steady – priority 1 group or channel
Steady (rotates clockwise) – scan mode enabled
If icon is not visible – scan is disabled
Steady – transmit in encrypt mode
Flashing – receiving an encrypted call
Steady – Channel Guard enabled
If icon is not visible – Channel Guard is disabled
Steady – Indicates the current channel is set up as a ProVoice or Aegis
channel
Steady – Indicates the current channel is set up as a Project 25 (P25)
channel.
Figure 8-8: Battery Charge Icons (Full Cycle)
The battery icons (see Figure 8-8) indicate approximate level only, based on battery voltage.
25