9 conventional operation, 1 receiving a call, 2 sending a call – Tyco Electronics P7100IP User Manual
Page 29: Conventional operation, Receiving a call, Sending a call
MM101332V1, Rev. K
9 CONVENTIONAL
OPERATION
In addition to the features covered in the following BASIC OPERATION section, the following functions
are for the conventional mode. The radio functions in the conventional mode when using conventional
communications channels (non-trunked).
9.1 RECEIVING
A
CALL
1. Select desired conventional system and channel or turn scan ON and make sure desired channel is in
scan list.
2. When the radio receives a call, the radio will unmute and the channel name will appear in the display.
9.2 SENDING A CALL
1. Select desired system and channel.
2. Ensure the channel is not busy by pressing the Clear/Monitor button momentarily. If audio is heard
or if the
icon is on, the channel is busy.
3. When sure that the channel is not busy, press the Push-To-Talk button and speak into the microphone.
29