Tyco Electronics P7100IP - Manual (Page 54)

MM101332V1, Rev. K
2. Press the PTT button. If the receiving radio receives the Page and responds, both radios will emit
three high-pitched tones.
11.9.1.1 Direct Dial Page (System Mode Only)
The following procedures describe how to initiate and complete a Direct Dial Page.
1. The ID is not stored in the pre-stored list of call IDs but the individual unit ID is known, it can be
entered directly from the keypad.
2. Press and hold the PTT button. If the receiving radio receives the Page and responds, both radios will
emit three high-pitched tones.
54