Technicolor - Thomson RP5430 - Manual (Page 32)

4-8 Operator's Manual LDK 200 Triax Location of Controls and Functions
Viewfinder
1
1 Zebra switch
This switch disables (OFF position) or enables the
zebra pattern in the viewfinder which indicates
high video levels. Values for the zebra function
are selected in the VF menu. (The zebra pattern
is switched off when the skin view is on.)
2
2 Option switch
This switch is included on the viewfinder to allow
future features to be incorporated.
3
3 Brightness control
Use this rotary control to adjust the brightness of the
viewfinder display to suit your needs.
4
4 Contrast control
Use this rotary control to adjust the contrast of the
viewfinder display to suit your needs.
5
5 Crispening control
This rotary control adjusts the sharpness of the
picture displayed in the viewfinder. Reduce the
crispening for a better picture when the gain is
set to +++.
6
6 Tally switch
The tally switch is used to control the tally indicator at
the front of the viewfinder.
When this switch is set to the ON position, the tally
indicator light when the camera is on-air.
When this switch is set to the OFF position, the tally
indicator does not light when the camera is on-
air.
The tally swith does not control the tally indicator at
the rear of the carrying handle.
7
7 Dioptre
The dioptre of the viewfinder can be adjusted to suit
your eyesight by turning the dioptre ring. The
range of the dioptre is +1 to -3.
1
2
3
4 5
6
7