Technicolor - Thomson RP5430 - Manual (Page 37)

Location of Controls and Functions Operator's Manual LDK 200 Triax 4-13
Aux
Tracker
REF
IN
Call
Mic
VF
Front Rear 48V
Ext
Scrip
Light
Breaker
Power on
DC in
CVBS (option)
Eng
Off
Prod
Ext
Mix
Front
Rear
Loc
TP
48V On
E
Ext 1
1
1 Call button
Pressing this momentary button sends a signal to the
control panels calling for attention.
2
2 Script Light connector
A 3-pole socket which supplies +12 Vdc for a script
light (maximum dissipation 0.25A). The optional
script board (LDK 6985/15) is connected to this
socket.
3
3 Teleprompter output socket
This BNC conector supplies the 1Vpp teleprompter
signal applied to the base station.
(This socket has no output if the reference input
socket is used as a return video channel).
Auxilary Functions
4
4 Aux connector
This 11-pole female socket provides analogue control
signals and facilities for the connection of a
private data channel (see installation manual).
5
5 Tracker connector
This 11-pole female socket provides full intercom and
signalling facilities for the dolly or crane driver
(see installation manual).
6
6 Reference input socket
This BNC conector is used to supply a 1Vpp reference
signal to the camera for genlocking when the
optional encoder (LDK 5435) is fitted.
This connector can be used as an input socket for a
1Vpp CVBS signal which is output on the TP
out connector of the Base Station. This is only
possible with Base Station type LDK 4501 and
when the optional encoder (LDK 5435) is fitted.
Select the function of this socket in the Install menu
of the camera or the System menu of the Base
Station.
1
2
3
4 5
6