TRENDnet trend COMBI 650 - Manual (Page 4)

Combi 650
-4-
Recommended Cutters
A 12.7mm ( 1 / 2 ”) diameter cutter must be used,
which has a 50mm cutting reach and plunge cut
facility.
Router must be plunged in stages of maximum
8mm in one pass.
Description Order Ref.
Craft Range Cutter C153x1/2TC
As above with TC centre tip C153Dx1/2TC
Trade Range Cutter TR17x1/2TC
As above with TC centre tip TR17Dx1/2TC
Professional Range Cutter 3/83x1/2TC
As above with TC centre tip 3/83Dx1/2TC
As per 3/83 but with shorter shank
for Makita, Ryobi & Hitachi routers
3/83Mx1/2TC
Replaceable tip cutter RT/11x1/2TC*
Above cutter (with shorter shank)
for Makita, Ryobi & Hitachi routers
RT/11Mx1/2TC*
Replacement blade (1 off) RB/A
Replacement blade (10 off) RB/A/10
*This cutter has a 30mm tip length but will cut to a
maximum depth of 50mm.
Order Ref. C153, TR17D, TR17, 3/83D, 3/83M
Order Ref. RT/11, RT/11M
Sub-base Sets
To obtain a perfect accurate close fitting joint, a
30mm guide bush must be used. The guide bush
must always be fitted concentric with the cutter.
This can be achieved using Trend sub-bases and
30mm outside diameter guide bush ref. GB30.
Trend sub-bases have a central recess to allow
fitting of the Trend guide bush to most makes of
routers and are available ready to fit the most
popular makes.
Two types are offered GB/5 and UNIBASE.
All sub-bases contain screws, a line-up bush and
two line-up pins. The line-up pins and bush
ensure exact alignment of sub-base with router
spindle, when fitted with the relevant collet.
r o u t i n g t e c h n o l o g y
R
trend tre
n
d
GB/5 SUB-BASE
Fits following Router Models
Description Order Ref.
Elu MOF31,77,98,131,177(E),
Bosch GOF1600A & 1700ACE
DeWalt DW625EK
Felisatti R346EC
GB/5
Makita 3612BR & 3600B
Ryobi RE600N & R600N, RE601
GB/5/A
Hitachi M12V, M12SA & TR12 GB/5/D
Makita 3612C & 3612 GB/5/J
Bosch 1300ACE GB/5/K
Freud FT2000E
AEG OFSE2000
Casals FT2000VCE
GB/5/L
Flex OFT3121VV,
Portercable 7539, 7519
GB/5/M
Felisatti TP246(E), Festo OF2000E,
Kinzo 25C46, Mafell L065E,
Metabo OF1612 & OFE1812,
Performance PRO1250,
Ryobi R500 & R502, Skil 1875U1,
Triton TRB001, Wadkin R500
GB/5/S*
*Please state model when ordering.
GB/5 Set comprises the following
Sub-base GB10
170mm Ø x 8mm
1 / 2 ” shank
line-up pin
1 / 4 ” shank
line-up pin
tr
e
n
d
10
mm
R
ACCESSORIES