TRENDnet trend COMBI 650 - Manual (Page 6)

Combi 650
-6-
100mm (4”) min.
throat depth
Panel Butt Connectors
Panel butt connectors are essential for
connecting worktops. They fit into the recess on
the underside of the worktop and are tightened
with a 10mm spanner. The jig has integral bolt
recess slots to allow the bolt recess to be cut in
the underside of the worktop, using the cutter.
The recess is elongated to allow easy access for
the spanner. Two types are offered, plastic
ended or metal ended. Plastic ended offer better
grip.
See the latest Trend Routing Catalogue for
details.
Description Order Ref.
Panel Butt Connectors plastic ends
(pack of 10)
PC/10
(pack of 50) PC/50
(pack of 100) PC/100
(pack of 1000) PC/1000
Panel Butt Connectors metal ends
(pack of 10)
PC/10/M
(pack of 50) PC/50/M
(pack of 100) PC/100/M
(pack of 1000) PC/1000/M
Biscuit Jointer for the Router
Worktops with inadequate support below them
need additional stability by biscuit jointing the
edges. The Trend biscuit jointing set for the
router together with the No.20 biscuits will
ensure worktops do not sag or warp in time, see
the latest Trend Routing Catalogue for details.
Description Order Ref.
Craft Range Biscuit Jointer Set C152x1/2TC
Trade Range Biscuit Jointer Set TR35x1/2TC
Professional Range Biscuit Jointer Set 342x1/2TC
No.20 Biscuits –
Quantity
100 BSC/20/100
1000 BSC/20/1000
IMPORTANT!
Two heavy duty quick action or
gripper clamps with throats of
at least 100mm (4”) are
required to secure the jig to the
worktop. Whenever fast action
clamps are used, ensure they
do not foul the router path and
that they are securely tightened.
Gripper Clamp
Description Order Ref.
Gripper Clamps 6003010
(Two off required)