T. S. MicroTech FireSCSI Xpress IEEE1394 - Manual (Page 18)

18
USER'S MANUAL USER'S MANUAL
The SCSI connector on my FireSCSI Xpress does not appear to be the same as on my
SCSI device(s) — how do I connect them?
A. The SCSI connector on your FireSCSI Xpress model may or may not be the appropriate
SCSI connector to use in your system configuration (depending on the SCSI connection
required for your hardware set up. You may need to obtain an adapter to properly connect
the FireSCSI Xpress to your SCSI device(s). Your existing SCSI device(s) may have already
included SCSI cables which may be appropriate to use. For more information contact the
manufacturer of your SCSI device(s), your local computer dealer, or Microtech's Technical
Support Department.
What are the main functions of the LED indicator on the FireSCSI Xpress?
A. The LED is used to indicate the operating status of the FireSCSI Xpress. When the LED is
not lit it can be an indication that there is either a lack of termination power or an improper
SCSI connection. The LED will also flash on and off to indicate that the FireSCSI Xpress is
being accessed/used by a connected SCSI device.
?
?