T. S. MicroTech FireSCSI Xpress IEEE1394 - Manual (Page 8)

USER'S MANUAL USER'S MANUAL
8
Connect a SCSI Device to the FireSCSI Xpress
Microtech includes accessories to help make setup as convenient and hassle free as possible.
The SCSI connector on your FireSCSI Xpress model may or may not be the appropriate SCSI
connector to use in your system configuration (depending on the type of connectors on your
SCSI device(s). You may need to obtain an adapter to properly connect the FireSCSI Xpress to
your SCSI device.
In most cases - you will plug a male DB25 cable (most likely included with your existing
SCSI device) directly to the DB25 female connector of the FireSCSI Xpress. In some
instances a gender changer may be required to properly connect to your cable or device.
Be sure the cable is firmly attached to your SCSI device. Secure the cable to the FireSCSI
using the fastening screws which are built-in to your cable.
NOTE: Only one device can be connected at a time. You can not daisy-chain multiple SCSI
devices.
1.
2.