Tally Genicom Tally Dot Matrix T2250 - Manual (Page 20)

➤ Moving the paper to
the tear position You can use the Tear key to move the paper to the tear position.
Make sure that the printer is in online mode. Press the Tear (4) key. The printer
moves the perforation edge of the fanfold paper to the tear edge (see below).
The display alternates between …
and …
After having torn off the paper, press the Exit (4) key. The printer returns the
paper to the first printing position.
If a print job is active, the printer returns the paper automatically to the first
printing position.
Online Tractor1
Tear Online
Setup
2 1 3 4
Tear position
Tractor1
Online
Setup
2 1 3 4
Online Tear
Exit Online
Setup
2 1 3 4
Tear edge
Paper handling Quick Start-up
18