TANDBERG Hub - Manual (Page 38)

TANDBERG 3G Gateway User Manual
Ethernet Speed
• Auto
The gateway will automatically detect the speed/duplex on the LAN.
• 10Half
The gateway will connect to the LAN using 10 Mbps/Half Duplex.
• 10Full
The gateway will connect to the LAN using 10 Mbps/Full Duplex.
• 100Half
The gateway will connect to the LAN using 100 Mbps/Half Duplex.
• 100Full
The gateway will connect to the LAN using 100 Mbps/Full Duplex.
DNS Interface1
Up to five Domain Name Server IP addresses can be specified here. Your LAN administrator will
provide the correct values for these fields. By default these fields are set to 127.0.0.1
Date and Time Settings
An NTP server address can be specified here to provide the 3G gateway with uptodate time and
date information.
Save
When ready to store the new settings, press ‘Save’. These settings will take effect when the
system has been restarted.
Restart
This button will restart the 3G Gateway. Any changes made in the IP Configuration of the 3G
Gateway will take effect after the system has been restarted.
38