Telos Zephyr Xport - Manual (Page 18)

ZEPHYR XPORT
USER’S GUIDE
8
CHAPTER 2 - GETTING STARTED
2.3 What have we here?
Time for a guided tour of your
XPORT
.
Accessories
A stand is available for the Xport to tip the unit up for easier viewing. Contact your Telos
representative to order Telos Part # 1451- 00199- 001.
A soft carry vase is also available. Request Telos Part # 2091- 00032
2.3.1 The front panel
THE MIXER SECTION
The
XPORT
's mixer section (pictured above) is easy to under stand. There are two
inputs: MIC and LINE. The mixed audio from these sources is fed to the Omnia
AGC/Limiter and to the codec for transmission to the far end.
This audio mix, together with the received audio is output on the headphone and the
Monitor Mix Out jacks. The ratio of these two audio sources is determined by setting of
the MIX control.
See the inside rear cover of this manual for a block diagram of how the mixer functions.
THE DISPLAY AND USER INTERFACE
The Zephyr
XPORT
has two menus screens accessed by pressing the <NAV> button.
Repeated presses of this button, pages through the screens of options. The following
information is meant as a quick introduction only. Section 3 (The Details) covers the
menu selections in detail.